Your Cart is Empty

Traditional Dip Application


  1. Clean your hands with warm, soapy water and dry thoroughly.
  2. Using a cuticle stick, push back cuticles.
  3. Trim to your desired length.
  4. Using a find grit nail file or buffer, carefully remove the shine form your nails.
  5. Using Isopropyl Alcohol, rub the nails to dehydrate and remove any oils.

Base + Powder

  1. Once alcohol is dry, apply a thin coat of your Base liquid, avoiding your cuticles.
  2. Dip your finger in the powder using a scooping motion. Allow your finger to remain in the powder for a couple seconds.
  3. Remove your finger and tap excess off. After removing from the dip powder, trace your cuticle with the point of the cuticle stick. Allow to dry while moving to the next finger.
  4. After completing Step 3 on each finger, return to your starting point and repeat base coat, dip, then cuticle trace. Repeat to obtain 3-4 layers.


  1. Generously apply Activator and wait 1 minute.
  2. After 1 minute, file and shape with a 180 grit file to your desired shape.
  3. Using a buffer, buff surface until smooth.
  4. After filing and buffing, rinse hands with plain water and nail scrub brush.
  5. Dry completely with a paper towel or allow to air dry.
  6. Apply another generous coat of Activator and wait 1 minute.

Top Coat

  1. After 1 minute, wipe nails with a dry paper towel to ensure nails are completely dry.
  2. Wipe again with Isopropyl Alcohol and allow to dry.
  3. Once dry, apply a thin layer of Top Coat in a couple quick strokes, avoiding the cuticles. Wait 1 minute.
  4. After 1 minute, apply a thicker layer of Top Coat with slower, more focused strokes. Avoid the cuticles but pay attention to the sides. Cap the nail edge. Allow to dry for 2 minutes.
  5. After nails are dry, finish with Cuticle Oil.